JWELL-PEEK|PPS|PPSU Plastic Board and Rod cold push bar recycling Making Extruder machine
Technical parameter:
Technical parameter:
PEEK|PPS|PPSU|POM Cold Push Bar and Sheet Production Line
The Chinese name for PEEK is called polyether ether ketone.Peek is part of the crystals, melting temperature is 334 ºC.The material is resistant to organic and water environment, and the material has excellent chemical resistance, thermal stability and oxidation resistance, as well as good mechanical strength, resistance to creep and electrical properties.It can withstand high energy radiation, good flame retardant performance.Peek in the long-term working temperature range from 100 ºC to + 250 ºC.It has been widely used in aerospace, medical, pharmaceutical and food processing industries, such as gas analyzer structural parts and heat exchangers on satellites.Due to its excellent friction resistance, it has become an ideal material in the field of friction application, such as roller bearing, sliding bearing, valve seat, sealing ring, pump wear ring, etc.
Polyether ether ketone (PEEK) is a colourless organic thermoplastic polymer in the polyaryletherketone(PAEK) family, used in engineering applications. It was originally introduced by Victrex PLC, then Imperial Chemical Industries (ICI) in the early 1980s.
PEEK polymers are obtained by step-growth polymerization by the dialkylation of bisphenolate salts. Typical is the reaction of 4,4'-difluorobenzophenone with the disodium salt of hydroquinone, which is generated in situ by deprotonation with sodium carbonate. The reaction is conducted around 300 °C in polar aprotic solvents - such as diphenyl sulphone.
PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. The processing conditions used to mold PEEK can influence the crystallinity and hence the mechanical properties. Its Young's modulus is 3.6 GPa and its tensile strength is 90 to 100 MPa.[5]PEEK has a glass transition temperature of around 143 °C (289 °F) and melts around 343 °C (662 °F). Some grades have a useful operating temperature of up to 250 °C (482 °F)[citation needed]. The thermal conductivity increases nearly linearly with temperature between room temperature and solidus temperature.[6] It is highly resistant to thermal degradation,[7] as well as to attack by both organic and aqueous environments. It is attacked by halogens and strong Brønsted and Lewis acids, as well as some halogenated compounds and aliphatic hydrocarbons at high temperatures. It is soluble in concentrated sulfuric acid at room temperature, although dissolution can take a very long time unless the polymer is in a form with a high surface-area-to-volume ratio, such as a fine powder or thin film. It has high resistance to biodegradation.
Because of its robustness, PEEK is used to fabricate items used in demanding applications, including bearings, piston parts, pumps, High-performance liquid chromatography columns, compressor plate valves, and electrical cable insulation. It is one of the few plastics compatible with ultra-high vacuum applications. PEEK is considered an advanced biomaterial used in medical implants, e.g., use with a high-resolution magnetic resonance imaging (MRI), for creating a partial replacement skull in neurosurgical applications.
PEEK is finding increased use in spinal fusion devices and reinforcing rods. It is extensively used in the aerospace, automotive, and chemical process industries.[8]PEEK seals and manifolds are commonly used in fluid applications. PEEK also performs well in applications where continuous high temperatures (up to 500 °F/260 °C) are common.[9] Because of this and its low thermal conductivity, it is also used in FFF printing to thermally separate the hot end from the cold end.
PEEK is not traditionally a shape-memory polymer; however, recent advances in processing have allowed shape-memory behavior in PEEK with mechanical activation. This technology has expanded to applications in orthopedic surgery.
Technical parameter:
Company InformationJwell made the first Chinese screw and barrel in 1978 in brand name Jinhailuo after hundreds time of testing. After more than 35 years development, JWELL is one of the biggest extrusion machine supplier in China with 5 factories, 300 design & test engineer, 3000 employee located in Zhoushan, Shanghai, Taicang, Dongguan, Liyang. Jwel have already provided more than 500 lines located in all countries. 300 Engineers are travelling in the world throughout year for installation and test of machine, the after-service are free and available forever.
Main products: various plastic pipes extrusion lines including large diameter PE/PVC double wall corrugated pipe extrusion line, large diameter PE/PVC solid wall pipe extrusion line, PP-R/PEX/PE-RT cool/hot water pipe extrusion line, PA/PE/PVC single wall corrugated pipe extrusion line; various plastic profile extrusion lines; various plastic plate & sheet extrusion lines; chemical fiber spinning; microcomputer controlled automatic blow molding machines; plastic auxiliary recycling lines; various single & twin screw and barrel extruders; T die; screen exchangers; Rollers and Robots.
All Key parts: screw & barrel, mould, calibrator and downstream equipment are made by Jwell factory!
We only choose qualified supplier
Jwell machining workshop
Assemble workshop
Jwell factories
A1: Jwell made the first Chinese screw and barrel in 1978 in brand name Jinhailuo. After more than 40 years development, JWELL is one of the biggest extrusion machine suppliers in China with 300 design & test engineer, 3000 employees. We own 5 manufacturing bases and sales center in Shanghai, Suzhou, Changzhou, Zhou Shan, Dongguan China. Jwell has become the premier supplier of extrusion lines and reliable business partners. Welcome to drop in us.
Q2: How many brands does Jwell Machinery own?
A2: Jwell Machinery owns more than 20 subsidiaries, China famous brand JINHAILUO, JWELL, BKWELL, DYUN are our Trade Marks.
Q3: If we don't find what we need from your website, What should we do? Do you make extrusion lines as per customers' specific requirement?
A3: Yes, we can provide bespoke service to customers with specific requirements. You can send the detailed requirements by email. We will check if we can develop them. We develop new machinery every month, and some of them may not yet be updated on our website.
Q4: How do you ensure your machinery and service quality?
A4: Our machines taking the European standards and follow the Germany type of business, we cooperation with International famous brands Siemens Schneider Flender Omron ABB WEG Falk Fuji etc. Our company continuously imports over 1000 international first-class high precision processing equipment such as multistage machining centers, NC lathes and CNC milling machines from Korea, Japan etc. All our processes strictly adhere to CE certification, IS09001 and 2008 quality management system. And we have 12 months quality warranty time. We testing the machine performances before each delivery. Jwell service engineers will always be here for anything you needed.
Q5: How can I order and make payments?
A5: Once clear your requirements and determined extrusion line is ideal for you. We will send technical solutions and Proforma Invoice to you. You can pay via TT bank transfer, LC as you like.
Q6: If we find your bank account or email different as before, how should we respond?
A6: Please don't send the payment and double check with us before arrange payment (Bank details will be listed in every piece of proforma invoice.) We are only responsible for email sent
Q7: How long is the delivery date?
A7: Usually it takes about 1 - 4 months depends on different machinery upon receipt of order advance payment.
Q8: What is your Minimum Order Quantity?
A8: One. We provide both customized extrusion lines and technical solutions. Welcome contact with us for technical innovation or improvements for your future purchasing plan.
Q9: What is your production capacity?
A9: We produce more than 2000 advanced extrusion lines every year world wide.
A10: What about shipping?
Q10: We can send the small spare parts by air express for urgent matter. And the complete production line by sea to save the cost. You can either use your own assigned shipping agent or our cooperative forwarder. The nearest port is China Shanghai, Ningbo port, which is convenient for maritime transportation..
Q11: Is there any pre-after sale service?
A11: Yes, we support our business partners by pre-after sale service. Jwell has more than 300 technical testing engineers traveling worldwide. Any cases would be responded with prompt solutions. We provide training, testing, operation and maintenance service for a life time.
Q12: Are our business& money safe with Jwell Machinery?
A12: Yes, your business is safe and your money is safe. If you check China company blacklist, you will see that it is not contain our name as we never crook our customer before. JWELL enjoys high reputation from the customers and our business and customers grows year by year.
Suzhou Jwell Poly Engineering Co., Ltd
Add: DongLin Industrial Park Chengxiang Taicang Suzhou China 215400
Contact: Ms. Lily Xu (Sales Manager)
+86 158 0622 5887
Web:jwellmachinery.en.made-in-china.com
JWELL-PEEK|PPS|PPSU Plastic Board and Rod cold push bar recycling Making Extruder machine
Technical parameter:
| TypeModel | SJZ45/25 |
| Material | PEEK PPS POM |
| Main engine rate of revolution | 10-49r/min |
| Main Motor power(kw) | 11KW |
| Capacity(Max) (kg/h) | 20 |
Technical parameter:
| TypeModel | YF800 | YF1000 | YF1250 |
| Production width(mm) | 800 | 1000 | 1250 |
| Extruder Model | SJZ80/156 | SJZ92/188 | SJZ92/188 |
| Type | YF180 | YF300/400 | YF600 |
| Motor power(kw) | 55 | 132 | 132 |
| Output (kg/h) | 250-350 | 400-600 | 400-600 |
| Cooling water (m3/h) | 12 | 15 | 15 |
| Compressor air(m3/min) | 0.8 | 1 | 1 |
PEEK|PPS|PPSU|POM Cold Push Bar and Sheet Production Line
The Chinese name for PEEK is called polyether ether ketone.Peek is part of the crystals, melting temperature is 334 ºC.The material is resistant to organic and water environment, and the material has excellent chemical resistance, thermal stability and oxidation resistance, as well as good mechanical strength, resistance to creep and electrical properties.It can withstand high energy radiation, good flame retardant performance.Peek in the long-term working temperature range from 100 ºC to + 250 ºC.It has been widely used in aerospace, medical, pharmaceutical and food processing industries, such as gas analyzer structural parts and heat exchangers on satellites.Due to its excellent friction resistance, it has become an ideal material in the field of friction application, such as roller bearing, sliding bearing, valve seat, sealing ring, pump wear ring, etc.
Polyether ether ketone (PEEK) is a colourless organic thermoplastic polymer in the polyaryletherketone(PAEK) family, used in engineering applications. It was originally introduced by Victrex PLC, then Imperial Chemical Industries (ICI) in the early 1980s.
PEEK polymers are obtained by step-growth polymerization by the dialkylation of bisphenolate salts. Typical is the reaction of 4,4'-difluorobenzophenone with the disodium salt of hydroquinone, which is generated in situ by deprotonation with sodium carbonate. The reaction is conducted around 300 °C in polar aprotic solvents - such as diphenyl sulphone.
PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. The processing conditions used to mold PEEK can influence the crystallinity and hence the mechanical properties. Its Young's modulus is 3.6 GPa and its tensile strength is 90 to 100 MPa.[5]PEEK has a glass transition temperature of around 143 °C (289 °F) and melts around 343 °C (662 °F). Some grades have a useful operating temperature of up to 250 °C (482 °F)[citation needed]. The thermal conductivity increases nearly linearly with temperature between room temperature and solidus temperature.[6] It is highly resistant to thermal degradation,[7] as well as to attack by both organic and aqueous environments. It is attacked by halogens and strong Brønsted and Lewis acids, as well as some halogenated compounds and aliphatic hydrocarbons at high temperatures. It is soluble in concentrated sulfuric acid at room temperature, although dissolution can take a very long time unless the polymer is in a form with a high surface-area-to-volume ratio, such as a fine powder or thin film. It has high resistance to biodegradation.
Because of its robustness, PEEK is used to fabricate items used in demanding applications, including bearings, piston parts, pumps, High-performance liquid chromatography columns, compressor plate valves, and electrical cable insulation. It is one of the few plastics compatible with ultra-high vacuum applications. PEEK is considered an advanced biomaterial used in medical implants, e.g., use with a high-resolution magnetic resonance imaging (MRI), for creating a partial replacement skull in neurosurgical applications.
PEEK is finding increased use in spinal fusion devices and reinforcing rods. It is extensively used in the aerospace, automotive, and chemical process industries.[8]PEEK seals and manifolds are commonly used in fluid applications. PEEK also performs well in applications where continuous high temperatures (up to 500 °F/260 °C) are common.[9] Because of this and its low thermal conductivity, it is also used in FFF printing to thermally separate the hot end from the cold end.
PEEK is not traditionally a shape-memory polymer; however, recent advances in processing have allowed shape-memory behavior in PEEK with mechanical activation. This technology has expanded to applications in orthopedic surgery.
Technical parameter:
| TypeModel | YF800 | YF1000 | YF1250 |
| Production width(mm) | 800 | 1000 | 1250 |
| Extruder Model | SJZ80/156 | SJZ92/188 | SJZ92/188 |
| Type | YF180 | YF300/400 | YF600 |
| Motor power(kw) | 55 | 132 | 132 |
| Output (kg/h) | 250-350 | 400-600 | 400-600 |
| Cooling water (m3/h) | 12 | 15 | 15 |
| Compressor air(m3/min) | 0.8 | 1 | 1 |
Company Information
Main products: various plastic pipes extrusion lines including large diameter PE/PVC double wall corrugated pipe extrusion line, large diameter PE/PVC solid wall pipe extrusion line, PP-R/PEX/PE-RT cool/hot water pipe extrusion line, PA/PE/PVC single wall corrugated pipe extrusion line; various plastic profile extrusion lines; various plastic plate & sheet extrusion lines; chemical fiber spinning; microcomputer controlled automatic blow molding machines; plastic auxiliary recycling lines; various single & twin screw and barrel extruders; T die; screen exchangers; Rollers and Robots.
All Key parts: screw & barrel, mould, calibrator and downstream equipment are made by Jwell factory!
We only choose qualified supplier
Jwell machining workshop
Assemble workshop
Jwell factories
FAQ
Q1. Is Jwell Machinery Manufacturer? A1: Jwell made the first Chinese screw and barrel in 1978 in brand name Jinhailuo. After more than 40 years development, JWELL is one of the biggest extrusion machine suppliers in China with 300 design & test engineer, 3000 employees. We own 5 manufacturing bases and sales center in Shanghai, Suzhou, Changzhou, Zhou Shan, Dongguan China. Jwell has become the premier supplier of extrusion lines and reliable business partners. Welcome to drop in us.
Q2: How many brands does Jwell Machinery own?
A2: Jwell Machinery owns more than 20 subsidiaries, China famous brand JINHAILUO, JWELL, BKWELL, DYUN are our Trade Marks.
Q3: If we don't find what we need from your website, What should we do? Do you make extrusion lines as per customers' specific requirement?
A3: Yes, we can provide bespoke service to customers with specific requirements. You can send the detailed requirements by email. We will check if we can develop them. We develop new machinery every month, and some of them may not yet be updated on our website.
Q4: How do you ensure your machinery and service quality?
A4: Our machines taking the European standards and follow the Germany type of business, we cooperation with International famous brands Siemens Schneider Flender Omron ABB WEG Falk Fuji etc. Our company continuously imports over 1000 international first-class high precision processing equipment such as multistage machining centers, NC lathes and CNC milling machines from Korea, Japan etc. All our processes strictly adhere to CE certification, IS09001 and 2008 quality management system. And we have 12 months quality warranty time. We testing the machine performances before each delivery. Jwell service engineers will always be here for anything you needed.
Q5: How can I order and make payments?
A5: Once clear your requirements and determined extrusion line is ideal for you. We will send technical solutions and Proforma Invoice to you. You can pay via TT bank transfer, LC as you like.
Q6: If we find your bank account or email different as before, how should we respond?
A6: Please don't send the payment and double check with us before arrange payment (Bank details will be listed in every piece of proforma invoice.) We are only responsible for email sent
Q7: How long is the delivery date?
A7: Usually it takes about 1 - 4 months depends on different machinery upon receipt of order advance payment.
Q8: What is your Minimum Order Quantity?
A8: One. We provide both customized extrusion lines and technical solutions. Welcome contact with us for technical innovation or improvements for your future purchasing plan.
Q9: What is your production capacity?
A9: We produce more than 2000 advanced extrusion lines every year world wide.
A10: What about shipping?
Q10: We can send the small spare parts by air express for urgent matter. And the complete production line by sea to save the cost. You can either use your own assigned shipping agent or our cooperative forwarder. The nearest port is China Shanghai, Ningbo port, which is convenient for maritime transportation..
Q11: Is there any pre-after sale service?
A11: Yes, we support our business partners by pre-after sale service. Jwell has more than 300 technical testing engineers traveling worldwide. Any cases would be responded with prompt solutions. We provide training, testing, operation and maintenance service for a life time.
Q12: Are our business& money safe with Jwell Machinery?
A12: Yes, your business is safe and your money is safe. If you check China company blacklist, you will see that it is not contain our name as we never crook our customer before. JWELL enjoys high reputation from the customers and our business and customers grows year by year.
Suzhou Jwell Poly Engineering Co., Ltd
Add: DongLin Industrial Park Chengxiang Taicang Suzhou China 215400
Contact: Ms. Lily Xu (Sales Manager)
+86 158 0622 5887
Web:jwellmachinery.en.made-in-china.com
JWELL-PEEK|PPS|PPSU Plastic Board and Rod cold push bar recycling Making Extruder machine