TZRS-VT200 (2X)
Fluoroelastomer(Viton) Heat Shrink Tubing
Description
TZRS-VT200(2X) modified fluoroelastomer heat-shrinkable tubing is highly abrasion and cut-through resistant and can withstand a wide variety of fuels, lubricants, acids and highly corrosive fluids at temperatures up to 200 Degrees Celcius. In addition to its high continuous operating temperature and chemical-resistance properties, this tubing is very flexible and is easily marked by hot-stamp or printwheel methods. When heated in excess of 175 Degrees Celcius, TZRS-VT200(2X) tubing rapidly shrinks to a skintight fit. TZRS-VT200(2X) tubing is rated for continuous operation from 55 Degrees Celcius to 200 Degrees Celcius.
Typical Applications
Because of its outstanding high temperature fluid performance, modified fluoroelastomer heat shrink tubing is often used to protect wiring and component covers in aircraft/aerospace applications including
Electronic control systems and hydraulic fluid transport mechanisms and in chemical plants.
Shrink Ratio
Modified fluoroelastomer heat shrink tubing has a 2: 1 shrink ratio. When freely recovered, the tubing will
Shrink to 50% of its as-supplied internal d i a m e t e r. The recovered wall thickness is proportional to the degree of recovery
Features
Cross-linked fluoroelastomer
Superior abrasion resistance
High temperature resistance
Excellent resistance to aggressive chemicals and slovents
Available with various wall thickness
Continuous operating temperature: -55Degrees Celcius~200Degrees Celcius
Min. Full recovery temp.: 175 Degrees Celcius
RoHS compliant
Flammability: UL 224 VW-1
Meets: SAE-AMS-DTL-23053/13
Ordering Information:
Standard colors: Black
Special colors: N/A
Packaging:
Standard packaging on spools.
Special: 1m, 1, 2m pieces are available on request
Other: Other cut lengths are available, please contact our sales department.
Note:
D* = Inner diameter as supplied
D* = Inner diameter after fully recovered
W*= Wall thickness after fully recovered
Technical Data
Dimensions
Fluoroelastomer(Viton) Heat Shrink Tubing
Description
TZRS-VT200(2X) modified fluoroelastomer heat-shrinkable tubing is highly abrasion and cut-through resistant and can withstand a wide variety of fuels, lubricants, acids and highly corrosive fluids at temperatures up to 200 Degrees Celcius. In addition to its high continuous operating temperature and chemical-resistance properties, this tubing is very flexible and is easily marked by hot-stamp or printwheel methods. When heated in excess of 175 Degrees Celcius, TZRS-VT200(2X) tubing rapidly shrinks to a skintight fit. TZRS-VT200(2X) tubing is rated for continuous operation from 55 Degrees Celcius to 200 Degrees Celcius.
Typical Applications
Because of its outstanding high temperature fluid performance, modified fluoroelastomer heat shrink tubing is often used to protect wiring and component covers in aircraft/aerospace applications including
Electronic control systems and hydraulic fluid transport mechanisms and in chemical plants.
Shrink Ratio
Modified fluoroelastomer heat shrink tubing has a 2: 1 shrink ratio. When freely recovered, the tubing will
Shrink to 50% of its as-supplied internal d i a m e t e r. The recovered wall thickness is proportional to the degree of recovery
Features
Cross-linked fluoroelastomer
Superior abrasion resistance
High temperature resistance
Excellent resistance to aggressive chemicals and slovents
Available with various wall thickness
Continuous operating temperature: -55Degrees Celcius~200Degrees Celcius
Min. Full recovery temp.: 175 Degrees Celcius
RoHS compliant
Flammability: UL 224 VW-1
Meets: SAE-AMS-DTL-23053/13
Ordering Information:
Standard colors: Black
Special colors: N/A
Packaging:
Standard packaging on spools.
Special: 1m, 1, 2m pieces are available on request
Other: Other cut lengths are available, please contact our sales department.
Note:
D* = Inner diameter as supplied
D* = Inner diameter after fully recovered
W*= Wall thickness after fully recovered
Technical Data
| Property | Test Method | Typical Data | |
| Property of jacket | |||
| Tensile strength | ASTM D 2671 | ≥8.5 MPa | |
| Ultimate elongation | ASTM D 2671 | ≥250% | |
| Heat aging | 250deg C, 168 hrs. | ≥8 MPa | |
| Tensile strength | ≥200% | ||
| Ultimate elongation | |||
| Heat shock | 300deg C,4 hrs. | No cracking | |
| Flammability | VW-1 | Pass | |
| Volume resistance | IEC 93 | ≥10 14 Ω .cm | |
| Dielectric strength | ASTM D 2671 | ≥7.9kV/mm | |
| Copper stability | UL 224 | Pass | |
| Copper corrosion | UL 224 | No corrosion | |
Dimensions
| Size (inch) | Size (mm) | As Supplied (mm) | After Recovery (mm) | Standard Length (m/spool) | |
| D* (Min.) | d*(Max.) | w*(Min.) | |||
TZRS-VT200(2X) Fluoroelastomer tubing | |||||
| 1/8 | 3.2 | 3.2 | 1.6 | 0.80 | 100 |
| 3/16 | 4.8 | 4.8 | 2.4 | 0.95 | 100 |
| 1/4 | 6.4 | 6.4 | 3.2 | 0.98 | 50 |
| 3/8 | 9.5 | 9.5 | 4.8 | 1.00 | 50 |
| 1/2 | 12.7 | 12.7 | 6.4 | 1.16 | 30 |
| 3/4 | 19.1 | 19.1 | 9.5 | 1.49 | 30 |
| 1 | 25.4 | 25.4 | 12.7 | 1.85 | 30 |
| 1 1/2 | 38.1 | 38.1 | 19.1 | 2.10 | 15 |
| 2 | 50.8 | 50.8 | 25.4 | 2.10 | 15 |
TZRS-VT200(2X) Thin wall fluoroelastomer tubing | |||||
| 3/8 | 9.5 | 9.5 | 4.8 | 1.00 | 50 |
| 1/2 | 12.7 | 12.7 | 6.4 | 1.00 | 30 |
| 5/8 | 15.9 | 15.9 | 7.9 | 1.20 | 30 |
| 3/4 | 19.1 | 19.1 | 9.5 | 1.25 | 30 |
| 7/8 | 22.0 | 22.0 | 11.0 | 1.37 | 30 |
| 1 | 25.4 | 25.4 | 12.7 | 1.37 | 30 |
| 1 1/4 | 31.8 | 31.8 | 15.7 | 1.54 | 30 |
| 1 1/2 | 38.1 | 38.1 | 19.0 | 1.54 | 15 |
| 2 | 50.8 | 50.8 | 25.4 | 1.82 | 15 |